Description
Features
- High Level monitoring of PSU Status (With Integriti Modules)
- Quick-Connect PSU interface (For Integriti modules)
- Separate battery charger output
- Deep Discharge battery protection
- Battery reverse polarity protection
- Constant current limiting on battery charger output
- Fully overload protected
- Smart Fuse protection
- Intelligent load sharing
- LED status indicators
- Universal low level status outputs – AC Fail & Batt Fail
- 3 x heavy duty DC output connections
- 240VAC 50Hz Input (IEC mains cable entry)
Specifications
Physical
- Size: 274(L) x 100W) x 64(D) (mm)
- Weight: 1.1 kg (PSU Only)
- Mounting: 4 x M4 screws to chassis
- Installation Environment: 0ºC – 50ºC @15% – 90% relative humidity (non-condensing)
- Working Temperature Range: -25ºC to +50ºC ambient unforced ventilation
Battery Alarm Thresholds
- Low Battery Alarm: 11.0VDC
- Deep Discharge Protection: 10.4VDC
- Recovery From Deep Discharge: 12.2VDC
Connections
- Outputs:
- 10-way Quick-Connect socket for Integriti modules
- 3 x common 13.75VDC +/- Smart Fused heavy duty outputs, suits upto 14 gauge cable
- Battery charger connection (for 12V lead acid battery)
- Low-level AC Failure output (open collector output)
- Low-level Battery Fail output (open collector output)
- External Earth terminal for connection to enclosure
- Inputs:
- Start Battery Test Input Trigger (zero volt dry contact input)
- IEC type mains power input socket
LED Indicators
- Status Indicators: AC OK
Battery Charging - Fault Indicators: Battery Fault, Fault on V+ Connection, Fault on Quick-Connect PSU Connection
Power Specifications
- Input: 240VAC, 50hz, 1.1Amp
- Mains Fuse: 2.0A (T)
- Output Voltage: 13.75VDC
- Max Output Current: 6.5Amp constant + 1.5Amp charger, 8.0Amp without charger (intelligent load sharing), 10.0Amp short term with battery support
- Load Regulation: < 2.5% @ load 0-9 Amp
- Output Ripple: < 100mVRMS @ full load
- Battery Charging: CC/CV
Battery Types
- Recommended Battery: 1 or 2, 18Ah 12V Sealed Lead Acid Only
