Description
Features
- Simple Plug and Play installation
- Ultra-fast 3G dual SIM polled communications paths
- 10/100 Mbps Ethernet port for high-speed polling
- Configurable bi-directional polling (meets requirements of Australian Standard AS2201.5)
- Secure 128Bit AES encrypted data transmission
- Over-the-air upload/download to compatible alarm systems available
- Dialler Capture port to receive communications from alarm panels equipped with a dialler and programmed to report Contact-ID
- High level integration with Integriti & Concept systems
- Remote firmware update capability
- General purpose security inputs
- Relay output for control of external devices
- Remotely arm/disarm connected alarm system
- App available that allows the end user to control their alarm system
- Alarm reporting using Contact-ID and IRFast with text formats
- Easy to read functional LED status display
- 12-24VDC supply voltage
- Battery backup capability
Specifications
|
Physical |
|
|
Size: |
101(L) x 98(W) x 35(D) (mm) |
|
Weight: |
190g |
|
Mounting: |
4 x M4 screws to chassis |
|
Installation Environment: |
0ºC – 50ºC @15% – 90% relative humidity (non-condensing) |
|
Working Temperature Range: |
-25ºC to +50ºC ambient unforced ventilation |
|
Connections |
|
|
Outputs: |
1 Relay Output |
|
Relay Contact Rating: |
2Amp 30VDC |
|
Inputs: |
1 configurable (EOL or No-EOL) |
|
Ethernet : |
10/100 Mbps |
|
PSTN (Phone): |
RJ12 |
|
PABX (Panel): |
RJ12 Contact-ID Dialer Capture |
|
Serial: |
RS-232, TTL |
|
LED Indicators |
|
|
Status Indicators: |
Power/Battery |
|
Panel |
|
|
GSM Registration |
|
|
Host (Server Online) |
|
|
Alarms Buffered |
|
|
GSM Modem |
|
|
SIM1/2 |
|
|
Ethernet Status (Link/Act) |
|
|
Alarm Communications |
|
|
Alarm Formats: |
Contact ID, IRFast, IRFast + Text |
|
Encryption: |
128 bit AES |
|
Upload / Download Data Pass-Through via IP (3G/Ethernet) |
|
|
Panel Connection: |
Dial up Modem, Serial RS232 |
|
Modem Modulation: |
Bell 103, V21, V22 |
|
PSTN / PABX |
|
|
PSTN Isolation Voltage: |
1500v RMS |
|
Max PABX line Voltage: |
65V RMS |
|
Max PABX Current: |
30mA |
|
PABX Output Level: |
10dBm |
|
Max RF Power: |
2 watts |
|
Power Specifications |
|
|
Input: |
12-24VDC, 200mA nominal (18VDC 1 Amp recommended for Battery backup ) |
|
Fuse: |
PTC protection + on board fuse (non replaceable) |
|
Charger Output Voltage: |
13.75VDC |
|
Charger Supply Current @ 18 volts: |
90mA (Idle) + 30mA (GSM Online) |
|
Max Output Current: |
500mA average |
|
Typical Battery Backup Time: |
72 hours (T4000 only) |
|
Minimum Battery Backup Time: |
48 hours (T4000 only) |
|
Minimum Operating Voltage: |
8 volts |
|
Low Battery Sense Voltage (Typical): |
11 volts |
|
Battery Types |
|
|
Recommended Battery |
12 Volt SLA (gel) type, 7 Amp-Hour |
